LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> IS 350 >> Repair and Diagnosis >> External Pages >> Different car >> Section 175 (Engine Control System - System & Component Testing, R & I) >> Camshaft Oil Control Valve >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Camshaft Oil Control Valve: Installation

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY LH 
    1. Apply a light coat of engine oil to a new 0-ring, and install it to the camshaft timing oil control valve
      Fig 1: Locating O-Ring From Camshaft Timing Oil Control Valve Assembly
      G05751860Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the camshaft timing oil control valve assembly with the bolt

      Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf) 

      NOTE:
      • Do not allow foreign matter to contact the oil seal face of the oil control valve (the surface that contacts the cylinder head cover sub-assembly).
      • Be careful that the O-ring is not cracked or does not jump out of position when installing the oil control valve.
        Fig 2: Locating Camshaft Timing Oil Control Valve Connector And Bolt
        G05751861Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Connect the camshaft timing oil control valve connector
  2. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY RH 
    1. Apply a light coat of engine oil to a new O-ring, and install it to the camshaft timing oil control valve
      Fig 3: Locating O-Ring From Camshaft Timing Oil Control Valve Assembly
      G05751860Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the camshaft timing oil control valve assembly with the bolt.

      Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf) 

      NOTE:
      • Do not allow foreign matter to contact the oil seal face of the oil control valve (the surface that contacts the cylinder head cover sub-assembly).
      • Be careful that the O-ring is not cracked or does not jump out of position when installing the oil control valve.
        Fig 4: Locating Camshaft Timing Oil Control Valve Connector With Bolt
        G05751859Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Connect the camshaft timing oil control valve connector
  3. INSTALL AIR CLEANER CAP SUB-ASSEMBLY  (See INSTALLATION  )
  4. INSPECT FOR OIL LEAK 
  5. INSTALL V-BANK COVER SUB-ASSEMBLY  (See INSTALLATION )
scientia non olet · About LEMON Manuals