Camshaft Position Sensor: Installation

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL CAMSHAFT POSITION SENSOR
1. Install the camshaft position sensor with the bolt.
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
2. Connect the camshaft position sensor connector
  
  Fig 1: Locating Camshaft Position Sensor And Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL VVT SENSOR (for Bank 1)
1. Install the 2 VVT sensors with the 2 bolts.
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
2. Connect the VVT sensor connectors.
  
  Fig 2: Locating VVT Sensor Connectors And Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Connect the 3 wire harness clamps.
  
  Fig 3: Locating Wire Harness Clamps
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL VVT SENSOR (for Bank 2)
1. Install the 2 VVT sensors with the 2 bolts.
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
2. Connect the VVT sensor connectors
  
  Fig 4: Locating VVT Sensor Connectors And Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Connect the wire harness clamp
INSPECT FOR OIL LEAK
INSTALL V-BANK COVER SUB-ASSEMBLY (See INSTALLATION )