Crankshaft Position Sensor: Installation

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL CRANK POSITION SENSOR
1. Install the crank position sensor with the bolt
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
2. Connect the crank position sensor connector.
INSPECT FOR OIL LEAK
INSTALL NO. 2 ENGINE UNDER COVER

Fig 1: Locating Crank Position Sensor Connector And Bolt
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002