Monitor Result
WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
Refer to CHECKING MONITOR STATUS
The test value and test limit information are described in the following table. This information is included under Monitor Result in the emission-related DTC sections:
- MID (Monitor Identification Data) is assigned to each emission-related component.
- TID (Test Identification Data) is assigned to each test value
- Scaling is used to calculate the test value indicated on generic OBD II scan tools
EVAP - Key-off Type
MONITOR RESULTMID TID Scaling Unit Description $3D $C9 Multiply by 0 001 kPa Test value for small leak (P0456)
Refer to pressure D(1)$3D $CA Multiply by 0 001 kPa Test value for gross leak (P0455)
Refer to pressure E(1)$3D $CB Multiply by 0 001 kPa Test value for leak detection pump stuck OFF (P2401)
Refer to pressure A(1)$3D $CD Multiply by 0 001 kPa Test value for leak detection pump stuck ON (P2402)
Refer to pressure A(1)$3D $CE Multiply by 0 001 kPa Test value for vent valve stuck OFF (vent) (P2420)
Refer to pressure C(1)$3D $CF Multiply by 0 001 kPa Test value for vent valve stuck ON (P2419)
Refer to pressure A(1)$3D $D0 Multiply by 0 001 kPa Test value for reference orifice low flow (P043E)
Refer to pressure B(1)$3D $D1 Multiply by 0 001 kPa Test value for reference orifice high flow (P043F)
Refer to pressure A(1)$3D $D4 Multiply by 0 001 kPa Test value for purge VSV stuck closed (P0441)
Refer to pressure F(1)$3D $D5 Multiply by 0 001 kPa Test value for purge VSV stuck open (P0441)
Refer to pressure E(1)$3D $D7 Multiply by 0 001 kPa Test value for purge flow insufficient (P0441)
Refer to pressure G(1)(1) Pressures A to G are indicated in the diagram below Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002