LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> IS 350 >> Repair and Diagnosis >> External Pages >> Different car >> Section 175 (Engine Control System - System & Component Testing, R & I) >> Engine Coolant Temperature Sensor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Coolant Temperature Sensor: Installation

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL E.F.I. ENGINE COOLANT TEMPERATURE SENSOR 
    1. Install a new gasket to the E.F.I, engine coolant temperature sensor.
    2. Install the E FI engine coolant temperature sensor.

      Torque: 21 N*m (214 kgf*cm, 15 ft.*lbf) 

    3. Connect the E FI engine coolant temperature sensor connector.
      Fig 1: Locating E FI Engine Coolant Temperature Sensor Connector
      G05751968Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL AIR CLEANER CAP SUB-ASSEMBLY  (See INSTALLATION  )
  3. ADD ENGINE COOLANT  (See REPLACEMENT )
  4. INSPECT FOR COOLANT LEAK  (See COOLING SYSTEM )
  5. INSTALL COOL AIR INTAKE DUCT SEAL  (See INSTALLATION )
  6. INSTALL V-BANK COVER SUB-ASSEMBLY  (See INSTALLATION )
  7. INSTALL ENGINE UNDER COVER 
scientia non olet · About LEMON Manuals