LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> IS 350 >> Repair and Diagnosis >> External Pages >> Different car >> Section 175 (Engine Control System - System & Component Testing, R & I) >> Engine Oil Temperature Sensor >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Oil Temperature Sensor: Inspection

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT OIL TEMPERATURE SENSOR 
    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance 

      TESTER CONNECTION SPECIFIED CONDITION CHART

      Tester Connection Condition Specified Condition
      1 - 2 25°C (77°F) 8.70 to 11.30 kΩ
      1 - 2 80°C (176°F) 1.529 to 1.869 kΩ
      Fig 1: Inspecting Oil Temperature Sensor
      G05751971Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      If the result is not as specified, replace the sensor

      NOTE: When checking the sensor in water, keep the terminals dry. After the check, wipe the sensor dry.