Engine Oil Temperature Sensor: Removal

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY
1. Remove the engine oil pressure switch assembly (See REMOVAL ).
REMOVE OIL TEMPERATURE SENSOR
1. Disconnect the temperature sensor connector.
2. Using SST, remove the temperature sensor and gasket
  SST 09922-10010
  NOTE:
  - Do not subject the temperature sensor to any impacts.
  - If the sensor is subjected to an impact, replace the temperature sensor with a new one.
    
    Fig 1: Removing Temperature Sensor And Gasket
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002