LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> IS 350 >> Repair and Diagnosis >> External Pages >> Different car >> Section 175 (Engine Control System - System & Component Testing, R & I) >> Mass Air Flow Meter >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Mass Air Flow Meter: Installation

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL MASS AIR FLOW METER 
    1. Install the MAF meter with the 2 screws.

      Torque: 1.0 N*m (10 kgf*cm, 9 in.*lbf) 

      NOTE: Make sure that the O-ring is not pinched.
    2. Connect the MAF meter connector
      3. Fig 1: Locating Mass Air Flow Meter Screws
      G05751922Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL ENGINE ROOM SIDE COVER RH  (See INSTALLATION )
  3. INSTALL COOL AIR INTAKE DUCT SEAL  (See INSTALLATION )
  4. INSTALL V-BANK COVER SUB-ASSEMBLY  (See INSTALLATION
scientia non olet · About LEMON Manuals