Typical Enabling Conditions
WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
All
TYPICAL ENABLING CONDITIONS
| The monitor will run whenever the following DTCs are not present | P0500 (VSS) P0748, P0778, P0798, P2810 and P2819 (Shift solenoid valve (range)) |
| Battery voltage | 8 V or more |
| Engine switch | On (IG) |
| Starter | OFF |
P0717
TYPICAL ENABLING CONDITIONS
| Shift change is completed (TCM selected gear before shift change) | 2nd, 3rd, 4th, 5th, 6th, 7th or 8th |
| Output shaft rpm | 1000 rpm or more |
| Park/neutral position switch | OFF |
| Transmission range | Not R position |
| Engine | Running |
| Transmission range switch circuit | Not malfunction |