LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> IS 350 >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Automatic Transaxle) >> Pattern Select Switch >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pattern Select Switch: Inspection

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT NO. 1 PATTERN SELECT SWITCH ASSEMBLY 
    1. Measure the resistance according to the value(s) in the table below.
      Fig 1: Identifying Pattern Select Switch Connector Terminal
      G05750944Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard Resistance 

      STANDARD RESISTANCE SPECIFICATION

      Tester Connection Switch Condition Specified Condition
      1 (E) - 6 (P) Press continuously Pattern select switch (SPORT) Below 1 Ω
      1 (E) - 6 (P) Release Pattern select switch (SPORT) 10 kΩ or higher
      1 (E) - 3 (2ND) Press continuously Pattern select switch (SNOW) Below 1 Ω
      1 (E) - 3 (2ND) Release Pattern select switch (SNOW) 10 kΩ or higher

      If the resistance value is not as specified, replace the pattern select switch.

scientia non olet · About LEMON Manuals