Millimeter Wave Radar Sensor: Installation
WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY
- Install the millimeter wave radar sensor with the 3 bolts.
Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf)
- Connect the connector.
- Install the millimeter wave radar sensor with the 3 bolts.
- INSTALL FRONT BUMPER ASSEMBLY (See INSTALLATION )
- INSTALL RADIATOR GRILLE PROTECTOR (See INSTALLATION )
- INSTALL COOL AIR INTAKE DUCT SEAL (See INSTALLATION )
- ADJUST MILLIMETER WAVE RADAR SENSOR ASSEMBLY (See ADJUSTMENT )
- ADD WASHER FLUID (w/ Headlight Cleaner System) (See INSTALLATION )
- VEHICLE PREPARATION FOR FOG LIGHT AIMING ADJUSTMENT(See ADJUSTMENT )
- PREPARATION FOR FOG LIGHT AIMING (See ADJUSTMENT )
- INSPECT FOG LIGHT AIMING (See ADJUSTMENT )
- ADJUST FOG LIGHT AIMING (See ADJUSTMENT )