LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> IS 350 >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Power Assist Systems) >> Power Steering System >> DTC Check/Clear
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Check/Clear

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK FOR DTCS 
    1. Turn the engine switch off.
    2. Connect the Techstream to the DLC3
    3. Turn the engine switch on (IG)
    4. Turn the Techstream on
    5. Read the DTCs following the display on the Techstream Enter the following menus Chassis / EMPS / Trouble Codes
    6. Refer to the Diagnostic Trouble Code Chart for DTC information (See DIAGNOSTIC TROUBLE CODE CHART )
  2. CLEAR DTCS 
    1. Turn the engine switch off
    2. Connect the Techstream to the DLC3
    3. Turn the engine switch on (IG)
    4. Turn the Techstream on
    5. Clear the DTCs by following the display on the Techstream Enter the following menus Chassis / EMPS / Trouble Codes
    6. According to the display on the Techstream, select the trouble code data display with the clear button
scientia non olet · About LEMON Manuals