LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> IS F >> Repair and Diagnosis (Single Page) >> Brakes >> Brakes Control Systems >> Brake Control / Dynamic Control Systems >> Skid Control Buzzer >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Skid Control Buzzer: Installation

  1. INSTALL SKID CONTROL BUZZER 
    1. Attach the clip and install the skid control buzzer
      Fig 1: Identifying Clip Of Skid Control Buzzer
      G05319606Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the skid control buzzer connector.
  2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY  (See INSTALLATION )
  3. INSTALL SIDE INSTRUMENT PANEL LH  (See INSTALLATION )
  4. INSTALL FRONT DOOR OPENING TRIM COVER LH  (See INSTALLATION )
  5. INSTALL FRONT DOOR SCUFF PLATE LH  (See INSTALLATION )
    Fig 2: Locating Skid Control Buzzer Connector
    G05752724Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION ).
scientia non olet · About LEMON Manuals