LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> IS F >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> Engine Control System - System & Component Testing, R & I >> Engine Coolant Temperature Sensor >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Engine Coolant Temperature Sensor: Removal

  1. REMOVE V-BANK COVER SUB-ASSEMBLY  (See REMOVAL )
  2. REMOVE COOL AIR INTAKE DUCT SEAL  (See REMOVAL )
  3. REMOVE AIR CLEANER CAP SUB ASSEMBLY  (See REMOVAL  )
  4. REMOVE ENGINE UNDER COVER 
  5. DRAIN ENGINE COOLANT  (See COOLANT )
  6. REMOVE E.F.I. ENGINE COOLANT TEMPERATURE SENSOR 
    1. Disconnect the E.F.I engine coolant temperature sensor connector.
    2. Remove the E.F.I engine coolant temperature sensor
    3. Remove the gasket from the engine coolant temperature sensor.
      Fig 1: Locating E.F.I Engine Coolant Temperature Sensor Connector
      G05751966Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals