April 5, 2026: LEMON Manuals is launched! Read the announcement.

Customize Parameters

CUSTOMIZE PARAMETERS USING THE TECHSTREAM

The following items can be customized.

NOTE:

When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.

Warning

REFERENCE CHART

Tester Display	Default	Content	Setting
Rear Buzzer Onset Range	Wide	Function to set rear buzzer activation range / Narrow or Wide	Narrow 600 mm (23.62 in) Wide 1,500 mm (59 06 in)
Keep Sense Status Buzzer	ON	Function to make buzzer sound when distance between vehicle and obstacle does not change for more than 3 seconds	ON/OFF
Fr & Rr Buzzer Volume	M2	Function to change volume of buzzer / L, M1, M2, M3 or H	L Low volume M1 medium low volume M2 medium volume M3 medium high volume H High volume

Sensor

REFERENCE CHART

Tester Display	Default	Content	Setting
Non P/R Range Sensor	F	Function to set available sensors when shift lever is not in P or R / F, Rcm² , F or All	F, Rcm² Corner sensors are available F Front sensors are available ALL All sensors are available