Cruise Control Main Switch: Inspection
- INSPECT CRUISE CONTROL MAIN SWITCH
- for vehicles without vehicle-to-vehicle distance control mode:
- Measure the resistance according to the value (s) in the table below.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Standard Resistance
TESTER CONNECTION SPECIFIED CONDITION CHARTTester Connection Switch Condition Specified Condition 3 (CCS) - 1 (ECC) Neutral 10 kΩ or higher 3 (CCS) - 1 (ECC) + (ACCEL)/RES (RESUME) 216 to 264Ω 3 (CCS) - 1 (ECC) - (COAST)/SET 567 to 693Ω 3 (CCS) - 1 (ECC) CANCEL 1386 to 1694Ω 3 (CCS) - 1 (ECC) Main Switch on Below 1Ω If the result is not as specified, replace the cruise control main switch.
- Measure the resistance according to the value (s) in the table below.
- for vehicles with vehicle-to-vehicle distance control mode.
- Measure the resistance according to the value (s) in the table below.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Standard Resistance
TESTER CONNECTION SPECIFIED CONDITION CHARTTester Connection Switch Condition Specified Condition 2 (R/N) - 1 (ECC)
3 (CCS) - 1 (ECC)Neutral 10 kΩ or higher 3 (CCS) - 1 (ECC) + (ACCEL)/RES (RESUME) 216 to 264Ω 3 (CCS) - 1 (ECC) - (COAST)/SET 567 to 693Ω 3 (CCS) - 1 (ECC) CANCEL 1386 to 1694Ω 3 (CCS) - 1 (ECC) Main Switch off 10 kΩ or higher 3 (CCS) - 1 (ECC) Main Switch on Below 1Ω 2 (R/N) - 1 (ECC) Main Switch on and Mode Switch on Below 1Ω If the result is not as specified, replace the cruise control main switch.
- Measure the resistance according to the value (s) in the table below.
- for vehicles without vehicle-to-vehicle distance control mode: