LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> IS F >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control >> Cruise Control System >> Road Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Road Test

  1. PROBLEM SYMPTOM CONFIRMATION 
    1. Inspect the SET function.
      1. Turn the cruise control main switch on.
      2. Drive at the required speed (40 km/h (25 mph) or higher).
      3. Push the cruise control main switch to -(COAST)/SET.
      4. After releasing the switch, check that the vehicle cruises at the set speed.
        Fig 1: Identifying Cruise Control Main Switch Directions - SET Function
        G04830972Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Inspect the + (ACCEL) function.
      1. Turn the cruise control main switch on.
      2. Drive at the required speed (40 km/h (25 mph) or higher).
      3. Push the cruise control main switch to -(COAST)/SET.
      4. Check that vehicle speed increases while the cruise control main switch is pushed to + (ACCEL)/RES (RESUME), and that the vehicle cruises at the newly set speed when the switch is released.
        Fig 2: Identifying Cruise Control Main Switch Directions - (ACCEL) Function
        G04830973Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      5. Push the cruise control main switch to + (ACCEL)/RES (RESUME) and then release it immediately. Check that vehicle speed increases by approximately 1.6 km/h (1.0 mph) (tap-up control)
    3. Inspect the-(COAST) function
      1. Turn the cruise control main switch on.
      2. Drive at the required speed between 40 km/h (25 mph) and 200 km/h (125 mph)
      3. Push the cruise control main switch to -(COAST)/SET.
      4. Check that vehicle speed decreases while the cruise control main switch is pushed to -(COAST)/SET, and the vehicle cruises at the newly set speed when the switch is released.
      5. Push the cruise control main switch to -(COAST)/SET, and then release it immediately. Check that vehicle speed decreases by approximately 1 6 km/h (1 0 mph) (tap-down control).
        Fig 3: Identifying Cruise Control Main Switch Directions - (COAST) Function
        G05195907Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Inspect the CANCEL function.
      1. Turn the cruise control main switch on.
      2. Drive at the required speed between 40 km/h (25 mph) and 200 km/h (125 mph).
      3. Push the cruise control main switch to -(COAST)/SET.
      4. When performing any one of the following, check that the cruise control system is canceled and that the normal driving mode is reset.
        Fig 4: Identifying Cruise Control Main Switch Directions - CANCEL Function
        G05252147Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        • Depressing the brake pedal
        • The shift lever is moved from D to N or M
        • Selecting the D3, D2 or D1 range with the shift lever in D
        • Turning the cruise control main switch off
        • Pulling the cruise control main switch to CANCEL
    5. Inspect the RES (RESUME) function.
      1. Turn the cruise control main switch on.
      2. Drive at the required speed between 40 km/h (25 mph) and 200 km/h (125 mph).
      3. Push the cruise control main switch to -(COAST)/SET.
      4. Cancel the cruise control system by performing any of the above operations (other than turning the main switch off).
      5. After pushing the cruise control main switch to + (ACCEL)/RES (RESUME) at a driving speed of more than 40 km/h (25 mph), check that the vehicle resumes the speed set prior to the cancellation.
        Fig 5: Identifying Cruise Control Main Switch Directions - RES (RESUME) Function
        G04830973Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals