LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> IS F >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control >> Millimeter Wave Radar Sensor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Millimeter Wave Radar Sensor: Installation

  1. INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY 
    1. Install the millimeter wave radar sensor with the 3 bolts.

      Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf) 

    2. Connect the connector.
    Fig 1: Locating Millimeter Wave Radar Sensor Assembly Bolts
    G05750654Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL FRONT BUMPER ASSEMBLY  (See INSTALLATION )
  3. INSTALL RADIATOR GRILLE PROTECTOR  (See INSTALLATION )
  4. INSTALL COOL AIR INTAKE DUCT SEAL  (See INSTALLATION )
  5. ADJUST MILLIMETER WAVE RADAR SENSOR ASSEMBLY  (See ADJUSTMENT  )
  6. ADD WASHER FLUID (w/ Headlight Cleaner System)  (See INSTALLATION )
  7. VEHICLE PREPARATION FOR FOG LIGHT AIMING ADJUSTMENT(See  ADJUSTMENT  ) 
  8. PREPARATION FOR FOG LIGHT AIMING  (See ADJUSTMENT )
  9. INSPECT FOG LIGHT AIMING  (See ADJUSTMENT )
  10. ADJUST FOG LIGHT AIMING  (See ADJUSTMENT )
scientia non olet · About LEMON Manuals