LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> IS F >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Navigation >> Navigation Ecu >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Navigation Ecu: Installation

  1. INSTALL NAVIGATION ECU 
    1. Install the navigation ECU with the 4 screws.
      Fig 1: Identifying Navigation ECU With Screws
      G05753769Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the connectors.
    Fig 2: Identifying Navigation ECU Connector
    G05753767Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL MULTI-DISPLAY ASSEMBLY  (See INSTALLATION  )
  3. INSTALL NO. 2 RADIO BRACKET  (See INSTALLATION )
  4. INSTALL NO. 1 RADIO BRACKET  (See INSTALLATION )
  5. INSTALL MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY  (See INSTALLATION )
  6. INSTALL CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL  (See INSTALLATION )
  7. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY  (See INSTALLATION )
  8. INSTALL FRONT ASH RECEPTACLE ASSEMBLY  (See INSTALLATION )
  9. INSTALL CONSOLE PANEL SUB-ASSEMBLY  (See INSTALLATION )
  10. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH  (See INSTALLATION )
  11. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH  (See INSTALLATION )
  12. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY  (See INSTALLATION )
  13. INSERT MAP DISC 
    1. Remove the clock assembly
    2. Turn the engine switch on (ACC)
    3. Insert the map disc
      Fig 3: Removing Clock Assembly
      G05753771Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Check that the wire harness is in the position shown in the illustration
      Fig 4: Identifying Wire Harness Position
      G05753772Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    5. Engage the 2 clamps and install the clock assembly
  14. ADJUST CLOCK 
    Fig 5: Installing Clock Assembly
    G05753773Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals