Inspection Procedure

1. Check with the customer if the vehicle has been turned by a turntable.

   OK: Vehicle has not been turned by turntable. 

   HINT

   If the vehicle is turned on a turntable with the engine switch on (IG), the system may store the angular velocity As a result, the vehicle position cursor may deviate

Fig 1: Checking Vehicle Stopped Condition
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

NG: TURN ENGINE SWITCH ON (IG) WHEN VEHICLE IS COMPLETELY STOPPED 

OK: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE  (See PROBLEM SYMPTOMS TABLE  )