LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> IS F >> Repair and Diagnosis >> Brakes >> Brakes Control Systems >> Brake Control / Dynamic Control Systems >> Skid Control Buzzer >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Skid Control Buzzer: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION ).
  2. REMOVE FRONT DOOR SCUFF PLATE LH  (See REMOVAL )
  3. REMOVE FRONT DOOR OPENING TRIM COVER LH  (See REMOVAL )
  4. REMOVE SIDE INSTRUMENT PANEL LH  (See REMOVAL )
  5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY  (See REMOVAL )
  6. REMOVE SKID CONTROL BUZZER 
    1. Disconnect the skid control buzzer connector.
      Fig 1: Locating Skid Control Buzzer Connector
      G05752724Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the clip and skid control buzzer
scientia non olet · About LEMON Manuals