LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> IS F >> Repair and Diagnosis >> Brakes >> Brakes Control Systems >> Brake Control / Dynamic Control Systems >> VSC Off Switch >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

VSC Off Switch: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION ).
  2. REMOVE FRONT DOOR SCUFF PLATE LH  (See REMOVAL )
  3. REMOVE FRONT DOOR OPENING TRIM COVER LH  (See REMOVAL )
  4. REMOVE SIDE INSTRUMENT PANEL LH  (See REMOVAL )
  5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY  (See REMOVAL )
  6. REMOVE VSC OFF SWITCH 
    1. Disengage the 4 claws and remove the VSC off switch with the switch base
      Fig 1: Identifying Claws Of VSC OFF Switch
      G05752730Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the 2 claws and remove the VSC off switch from the switch base.
scientia non olet · About LEMON Manuals