September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Integration Relay: Removal
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See
INITIALIZATION
).
- REMOVE NO. 2 RELAY BLOCK COVER
- REMOVE INTEGRATION RELAY
- Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and pull up the integration relay.
- Disconnect the 3 connectors.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002