Data List / Active Test
- READ DATA LIST
HINT:
Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
NOTE: In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Body Electrical / (desired system) / Data List.
- According to the display on the Techstream, read the "Data List".
Main Body (Main body ECU)
DATA LISTTester Display Measurement Item/Range Normal Condition D Door Courtesy SW Driver side door courtesy light switch signal / ON or OFF ON: Driver side door is opened
OFF: Driver side door is closedP Door Courtesy SW Front passenger side door courtesy light switch signal / ON or OFF ON: Front passenger side door is opened
OFF: Front passenger side door is closedRL Door Courtesy SW Rear LH side door courtesy light switch signal / ON or OFF ON: Rear LH side door is opened
OFF: Rear LH side door is closedRR Door Courtesy SW Rear RH side door courtesy light switch signal / ON or OFF ON: Rear RH side door is opened
OFF: Rear RH side door is closedMaster Switch (Master switch)
DATA LISTTester Display Measurement Item/Range Normal Condition Door Lock Switch Status Door manual lock switch signal / ON or OFF ON: Door control switch is ON (LOCK)
OFF: Door control switch is OFFDoor Unlock Switch Status Door manual unlock switch signal / ON or OFF ON: Door control switch is ON (UNLOCK)
OFF: Door control switch is OFFDriver Door (Front door ECU LH)
DATA LISTTester Display Measurement Item/Range Normal Condition Lock Position SW Driver side door lock position switch signal / ON or OFF ON: Driver side door is unlocked
OFF: Driver side door is lockedDoor Key Linked Lock SW Door key linked lock switch signal / ON or OFF ON: Driver side door key cylinder is turned to lock position
OFF: Driver side door key cylinder is not turnedDoor Key Linked Unlock SW Door key linked unlock switch signal / ON or OFF ON: Driver side door key cylinder is turned to unlock position
OFF: Driver side door key cylinder is not turnedPassenger Door (Front door ECU RH)
DATA LISTTester Display Measurement Item/Range Normal Condition Lock Position SW Front passenger side door lock position switch signal / ON or OFF ON: Front passenger side door is unlocked
OFF: Front passenger side door is lockedDoor Lock SW Door manual lock switch signal / ON or OFF ON: Front passenger side door control switch is ON (LOCK)
OFF: Front passenger side door control switch is OFFDoor Unlock SW Door manual unlock switch signal / ON or OFF ON: Front passenger side door control switch is ON (UNLOCK)
OFF: Front passenger side door control switch is OFFRear Left Door (Rear door ECU LH)
DATA LISTTester Display Measurement Item/Range Normal Condition Lock Position SW Rear door LH side door lock position switch signal / ON or OFF ON: Rear door LH side door is unlocked
OFF: Rear door LH side door is lockedRear Right Door (Rear door ECU RH)
DATA LISTTester Display Measurement Item/Range Normal Condition Lock Position SW Rear door RH side door lock position switch signal / ON or OFF ON: Rear door RH side door is unlocked
OFF: Rear door RH side door is locked
- PERFORM ACTIVE TEST
HINT:
Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Body Electrical / (desired system) / Active Test.
- According to the display on the Techstream, perform the "Active Test".
Driver Door (Front door ECU LH)
DATA LISTTester Display Test Part Control Range Door Lock Operate door lock motor Lock or Unlock Passenger Door (Front door ECU RH)
DATA LISTTester Display Test Part Control Range Door Lock Operate door lock motor Lock or Unlock Rear Left Door (Rear door ECU LH)
DATA LISTTester Display Test Part Control Range Door Lock Operate door lock motor Lock or Unlock Rear Right Door (Rear door ECU RH)
DATA LISTTester Display Test Part Control Range Door Lock Operate door lock motor Lock or Unlock