Customize Parameters
- CUSTOMIZING FUNCTION WITH TECHSTREAM (REFERENCE) NOTE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first male sure that the function is set to the default setting.
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Customize Setting /
- Select the setting by referring to the table below.
Wireless Door Lock:
STANDARD VOLTAGEDisplay (Item) Default Contents Setting Hazard Answer Back ON When LOCK switch on transmitter is pressed, this function illuminates hazard warning lights once. When UNLOCK switch is pressed, hazard warning lights illuminate twice ON/OFF Wireless Control ON Function that turns wireless door lock function ON or OFF ON/OFF Open Door Warning ON If door is not completely closed and transmitter LOCK switch is pressed, this function makes buzzer sound for 10 seconds ON/OFF Trunk Lid Operation 0.8 s This function changes transmitter operation method for opening luggage compartment door 1 tim ON/2 tim ON/0.8 s/Prohibit Panic Alarm Function ON Function to operate theft deterrent system by continuously pressing panic switch on transmitter for 2.5 seconds ON/OFF Unlock 2 Operation ON Function that unlocks driver side door when unlock switch on transmitter is pressed once, and unlocks all doors when pressed twice. If setting is OFF, pressing unlock switch once makes all doors unlock. ON/OFF Auto Lock Time 60s Function to change time until relocking after unlocking with wireless door lock function 30s/60s/120s Wireless Auto Lock ON This function controls unlocking doors to automatic relocking function ON/OFF