Customize Parameters
- CUSTOMIZING FUNCTION WITH TECHSTREAM (REFERENCE) NOTE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Customize Setting /
- Select the setting by referring to the table below.
Others
CUSTOMIZE SETTING REFERENCE TABLESystem Default Contents Setting Rear Shade Delay Time 0.7 s Function to adjust reverse-linked sunshade lowering function's response time 0.7 s/1.2 s/0.9 s/0.0 s R-pos to Rear Sun Shade COM ON Reverse linked function ON or OFF