LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> LS 460L >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - System & Circuit Troubleshooting, Component Inspection And R & I >> Engine Coolant Temperature Sensor >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Coolant Temperature Sensor: Inspection

  1. INSPECT ENGINE COOLANT TEMPERATURE SENSOR 
    Fig 1: Inspecting Engine Coolant Temperature Sensor
    G05853909Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Partially soak the sensor in water and warm up the water.
    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance 

      TESTER CONNECTION SPECIFIED CONDITION CHART

      Tester Connection Condition Specified Condition
      1 - 2 Approx. 20°C (68°F) 2.32k to 2.59 kΩ
      1 - 2 Approx. 80°C (176°F) 0.310k to 0.326 kΩ

      If the result is not as specified, replace the sensor.

      NOTE: When checking the sensor in water, keep the terminals dry. After the check, wipe the sensor dry.
scientia non olet · About LEMON Manuals