Steering Pad Switch: Installation

INSTALL STEERING PAD SWITCH ASSEMBLY
1. Install the switch with the 4 screws
2. Connect the connector.
INSTALL STEERING PAD (See INSTALLATION )
INSTALL SWITCH AND VOLUME CASE (See INSTALLATION )

Fig 1: Identifying Screws And Steering Pad Switch
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 2 STEERING WHEEL COVER LOWER (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable some systems need to be initialized after the cable is reconnected (see INITIALIZATION ).
INSTALL BATTERY SERVICE HOLE COVER LH (See INSTALLATION )
INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (See INSTALLATION )
INSPECT STEERING PAD (See INSTALLATION )
CHECK SRS WARNING LIGHT
1. Check the SRS warning light (see DIAGNOSIS SYSTEM )