Customize Parameters

HINT: 

The following items can be customized.

1. Using Techstream 
   WIRELESS DOOR LOCK
   
   

   Tester Display	Default	Contents	Setting
   Open Door Warning (Open door warning)	ON	Function to make the buzzer sound for 10 seconds if the door is open when locking with the wireless door lock function.	ON / OFF
   Wireless Control (Wireless door lock control function)	ON	ON / OFF of the wireless door lock function.	ON / OFF
   Alarm Function (*1) (Panic function)	ON	Function to operate the theft deterrent system by keeping pressing the lock button of the transmitter for 2.5 seconds. If there is a panic button, press the panic button instead of the lock button.	ON / OFF
   Unlock 2 Operation (2 times operation wireless unlock)	ON	Function to unlock the driver's door by pressing the unlock button of the transmitter once and to unlock all the doors by pressing it twice. In the OFF setting, pressing one time makes all the doors unlocked.	ON / OFF
   Trunk Lid Operation (Trunk lid open function type)	0.8 s PR	To change the operation method of opening the luggage compartment by the transmitter.	1 TIME / 2 TIMES / 0.8 s PR / OFF
   Auto Lock Time (Auto lock time)	30 s	To change the time until re-locking after unlocking with the wireless door lock function.	60 s / 30 s
   Hazard Answer Back (Hazard answer back of the wireless)	ON	Function to light up the all turn signal lights once when pressing the transmitter lock button and twice when pressing the unlock button.	ON / OFF
   Wireless Auto Lock (Wireless auto lock)	ON	This function turns the wireless auto lock function on or off.	ON / OFF
   Wireless Buzzer Resp (Wireless buzzer response)	ON	ON / OFF of the wireless buzzer response function.	ON / OFF

   *1: w/ Theft deterrent system

   WARNING (COMBINATION METER)
   
   

   Tester Display	Default	Contents	Setting
   Key Remnd Volum (Key reminder buzzer volume)	LARGE	To change the volume of the key reminder buzzer.	LARGE / MEDIUM / SMALL
   Key Remnd Sound (Key reminder buzzer sound)	NORMAL	To change the frequency of the key reminder buzzer.	NORMAL / FAST / SLOW / 0 s

   SMART
   
   

   Tester Display	Default	Contents	Setting
   Ignition Available Area (SMART ignition available area)	ALL	Function to choose the available area for smart key to start E/G and cancel the Steering Lock.	FRONT / ALL
   Park Wait Time (Wait time to permit opening door after locking)	2.5 s	Setting a wait time to permit opening a door after it being locked with SMART entry.	0.5 s / 1.5 s / 2.5 s / 5 s
   Trunk Open Mode (Luggage compartment opening operation when vehicle is locked)	ON	Function to open a luggage compartment when the driver has the key and press the luggage open button.	ON / OFF
   Key Low Battery Warning	ON	Function to set a warning function for the time when a key battery becomes weak.	ON / OFF

2. Entry Unlock Mode Switching 
   1. Check that the power source mode is OFF and the LED on the key does not blink. Press the LOCK button and one of the other buttons on the key at the same time for approximately 5 seconds while the key is in the actuation area.
   2. Certification ECU receives this signal from the tuner and switches the entry unlock mode.
   3. The certification ECU sounds the buzzer of the wireless door lock buzzer and combination meter to inform the user that the mode has been switched.
      Fig 1: Identifying Wireless Door Lock Buzzer Blinking Pattern

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      HINT: 

      • The function only switches the entry unlock of the smart key system. It does not switch the unlocking of the wireless door lock remote control.
      • The entry unlock mode cannot be changed for 5 seconds after the previous change.
3. Key Cancel 

   Key cancel is operated when certain operations are performed with the vehicle in the following conditions.

   • A function that allows you to lock / unlock the doors and open the luggage compartment by simply carrying a key.
   • A function that causes the vehicle to beep if keys are left inside the vehicle or luggage compartment and a door is closed.
   • A function that recalls the position of the driver's seat and side rear view mirrors.
   1. The operation procedures are as follows:
      1. Unlock the driver side door once with the UNLOCK button of the key.
      2. Open the driver door within 5 seconds.
      3. Unlock the driver side door twice with the UNLOCK button of the key within 5 seconds.
      4. Close and open the driver door twice within 30 seconds.

         (Driver Door: Close → Open → Close → Open)

      5. Unlock the driver side door twice with the UNLOCK button of the key within 5 seconds.
      6. Close and open the driver door within 30 seconds.

         (Driver Door: Close → Open)

      7. Close the driver door within 5 seconds.

         When key cancel is activated, the wireless door lock buzzer sounds once.

         To return to the original condition, perform the procedures again. When key cancel is returned, the wireless door lock buzzer sounds twice.