Cruise Control Main Switch: Installation

INSTALL CRUISE CONTROL MAIN SWITCH
1. Install the switch with the 2 screws.
  
  Fig 1: Identifying Switch With Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the connector and clamp.
INSTALL STEERING PAD (See INSTALLATION )
INSTALL LOWER NO. 2 STEERING WHEEL COVER (See INSTALLATION )

Fig 2: Locating Cruise Control Main Switch Connector With Clamp
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL LOWER NO. 3 STEERING WHEEL COVER (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION ).
CHECK SRS WARNING LIGHT
1. Check the SRS warning light (See DIAGNOSIS SYSTEM ).
INSTALL ENGINE ROOM SIDE COVER LH (See INSTALLATION )