LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> LX 570 >> Repair and Diagnosis >> Brakes >> Brakes Control Systems >> Brake Control / Dynamic Control Systems >> Crawl Switch >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Crawl Switch: Installation

  1. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY (CRAWL SWITCH) 
    1. Install the integration control and panel to the position indicator housing with the 5 screws.
    2. Connect the connector.
    Fig 1: Locating Integration Control And Panel Assembly Screws
    G05761730Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL LOWER POSITION INDICATOR HOUSING  (See INSTALLATION )
  3. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY  (See INSTALLATION )
  4. INSTALL CONSOLE CUP HOLDER BOX SUB-ASSEMBLY  (See INSTALLATION )
  5. INSTALL PARKING BRAKE HOLE COVER  (See INSTALLATION )
  6. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY  (See INSTALLATION )
  7. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY  (See INSTALLATION )
  8. INSTALL INNER NO. 1 INSTRUMENT PANEL BRACKET COVER RH  (See INSTALLATION )
  9. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH  (See INSTALLATION )
  10. INSTALL INNER NO. 1 INSTRUMENT PANEL BRACKET COVER LH  (See INSTALLATION )
  11. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH  (See INSTALLATION )
  12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION ).
scientia non olet · About LEMON Manuals