LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> LX 570 >> Repair and Diagnosis >> Electrical >> Gauges >> Meter >> Combination Meter >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Combination Meter: Installation

  1. INSTALL COMBINATION METER ASSEMBLY 
    1. Connect the connector.
      Fig 1: Locating Combination Meter Assembly
      G05765448Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Attach the 2 clips.
      Fig 2: Identifying Combination Meter Clips
      G05765456Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Install the combination meter with the 2 screws.
    Fig 3: Identifying Combination Meter Assembly And Screw
    G05765446Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY 
    1. Attach the 5 claws to install the register.
    Fig 4: Identifying No. 3 Instrument Panel Register Assembly And Claws
    G05765445Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY 
    1. Attach the 4 claws to install the register.
    Fig 5: Identifying No. 1 Instrument Panel Register Assembly And Claws
    G05765444Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY 
    1. Connect the connectors.
    2. Attach the 4 claws to install the finish panel.
      Fig 6: Identifying Finish Panel And Claws
      G05765443Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Attach the 6 claws.
    Fig 7: Identifying Instrument Cluster Finish Panel Sub-Assembly And Claws
    G05765442Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH 
    1. Connect the connector
    2. Attach the 8 claws to install the instrument panel pad.
    Fig 8: Identifying Lower Instrument Panel Pad Sub-Assembly LH And Claws
    G05765441Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. INSTALL NO. 1 SWITCH HOLE BASE 
    1. Connect the connectors
    2. Attach the 5 claws to install the hole base.
    Fig 9: Identifying No. 1 Switch Hole Base And Claws
    G05765440Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. INSTALL INSTRUMENT SIDE PANEL LH 
    Fig 10: Identifying Instrument Side Panel LH And Claws
    G05765464Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Attach the 6 claws to install the side panel.
  8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    NOTE:
    • Reset the Autoaway/Return function setting to the previous condition by changing the customize parameter (See CUSTOMIZE PARAMETERS ).
    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION ).
  9. INSTALL ENGINE ROOM SIDE COVER LH  (See INSTALLATION )
scientia non olet · About LEMON Manuals