LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> LX 570 >> Repair and Diagnosis >> Suspension >> Suspension Control Systems >> Suspension Control >> Absorber Control Switch >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Absorber Control Switch: Installation

  1. INSTALL INTEGRATION CONTROL AND PANEL SUB-ASSEMBLY (ABSORBER CONTROL SWITCH) 
    1. Install the integration control and panel to the position indicator housing with the 5 screws.
    2. Connect the connector.
    Fig 1: Locating Integration Control And Panel Screws
    G05761730Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL LOWER POSITION INDICATOR HOUSING  (See REASSEMBLY )
  3. INSTALL CONSOLE BOX POCKET  (See REASSEMBLY )
  4. INSTALL SWITCH WIRE  (See REASSEMBLY )
  5. INSTALL POSITION INDICATOR HOUSING ASSEMBLY  (See INSTALLATION )
  6. INSTALL CONSOLE CUP HOLDER BOX SUB-ASSEMBLY  (See INSTALLATION )
  7. INSTALL PARKING BRAKE HOLE COVER  (See INSTALLATION )
  8. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY  (See INSTALLATION )
  9. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH  (See INSTALLATION )
scientia non olet · About LEMON Manuals