Rear Side Speaker: Installation

HINT:

1. Use the same provedures for the RH side and LH side.
2. The procedures listed below are for the LH side.

1. INSTALL REAR SPEAKER ASSEMBLY LH 
   1. Install the speaker with the 3 screws.
   Fig 1: Identifying Rear Speaker Screws
   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Install the clamp.
   3. Connect the connector.
2. INSTALL QUARTER TRIM PANEL ASSEMBLY FRONT LH 
3. INSTALL DOOR SCUFF PLATE ASSEMBLY LH (See  REASSEMBLY  ). 
4. INSTALL REAR SEATBACK ASSEMBLY (See  INSTALLATION  ). 
5. INSTALL REAR SEAT HEADREST ASSEMBLY (See  INSTALLATION  ). 
6. INSTALL REAR SEAT HEADREST PLATE (See  INSTALLATION  ). 
7. INSTALL WIND DEFLECTOR BOARD ASSEMBLY (See  INSTALLATION  ). 
8. INSTALL REAR SEAT HEADREST PLATE COVER (See  INSTALLATION  ). 
9. INSTALL REAR SEAT CUSHION ASSEMBLY (See  INSTALLATION  ). 
10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
11. PERFORM INITIALIZATION 
    1. Perform initialization (see INITIALIZATION ).

    NOTICE: 

    Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.