Data List / Active Test
- READ DATA LIST
HINT:
Using the DATA LIST displayed on the Techstream, you can read the value of the switch, sensor, actuator, etc. without parts removal. Reading the DATA LIST as the first step in troubleshooting is one way to shorten the labor time.
- Connect the Techstream to the DLC3.
- Turn the ignition switch to the ON position.
- Turn the tester ON.
- Enter the following menus: Body Electrical / (desired system) / Data List
- According to the display ont he tester, read the "Data List".
Immobilizer
DATA LIST - IMMOBILIZERTester Display Measurement Item / Range Normal Condition Diagnostic Note Key SW Key unlock warning switch signal /ON or OFF ON: Key is in ignition key cylinder
OFF: No key is in ignition key cylinder- Driver Door
DATA LIST - DRIVER DOORTester Display Measurement Item / Range Normal Condition Diagnostic Note Lock Pos SW Door unlock detection switch signal / ON or OFF ON: Door is unlocked
OFF: Door is locked- Courtesy SW Door courtesy switch signal / ON or OFF ON: Door is open
OFF: Door is closed- Passenger Door
DATA LIST - PASSSENGER DOORTester Display Measurement Item / Range Normal Condition Diagnostic Note Lock Pos SW Door unlock detection switch signal / ON or OFF ON: Door is unlocked
OFF: Door is locked- Courtesy SW Door courtesy switch signal / ON or OFF ON: Door is open
OFF: Door is closed-
- PERFORM ACTIVE TEST
HINT:
Performing the ACTIVE TEST using the Techstream allows relay, VSV, actuator, etc. to operate without remobing any parts. Performing the ACTIVE TEST as the first step of troubleshooting is one way to shorten labor time.
- Connect the Techstream to the DLC3.
- Turn the ignition switch to the ON position.
- Turn the tester ON.
- Enter the following menus: Body electrical / Body Live / Active Test.
- According to the display ont he tester, perform the "Active Test"..
Driver Door
ACTIVE TEST - DRIVER DOORTester Display Test Part Control Range Door Lock Operate door lock motor / LOCK, UNLOCK -