September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Ignition Switch: Installation
- INSTALL IGNITION SWITCH ASSEMBLY
- Install the ignition switch with the 2 screws.
- Install the clamp.
- Connect the ignition switch connector and unlock warning switch connector.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY (See
INSTALLATION
)
- CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
- PERFORM INITIALIZATION
- Perform initialization (see
INITIALIZATION
).
NOTE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.