September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Camshaft Position Sensor: Removal
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
- DRAIN ENGINE COOLANT
(See COOLANT
)
- REMOVE NO. 1 AIR CLEANER INLET
(See
REMOVAL )
- REMOVE V - BANK COVER
(See
REMOVAL )
- REMOVE NO. 1 RADIATOR HOSE
- REMOVE NO. 3 TIMING BELT COVER SUB-ASSEMBLY LH (see TIMING BELT
)
- REMOVE CAMSHAFT POSITION SENSOR
- Remove the bolt, stud bolt and sensor.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002