September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Knock Sensor: Removal
- DISCHARGE FUEL SYSTEM PRESSURE
(See ON-VEHICLE INSPECTION
)
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
- DRAIN ENGINE COOLANT
(See COOLANT
)
- REMOVE V - BANK COVER
(See
REMOVAL )
- REMOVE NO. 1 AIR CLEANER INLET
(See
REMOVAL )
- REMOVE INTAKE AIR CONNECTOR PIPE
(See
REMOVAL )
- REMOVE INTAKE MANIFOLD
- Remove the intake manifold (see INTAKE MANIFOLD
).
- REMOVE KNOCK SENSOR
- Disconnect the 2 knock sensor connectors.
- Remove the 2 nuts and 2 knock sensors.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002