Ignition Coil: Installation
WARNING: This page is about a different car, the 2007 Lexus SC 430. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL IGNITION COIL ASSEMBLY
- Connect the ignition coil to the spark plug, attach the ignition coil to the cylinder head cover, and install the bolt.
Torque: 7.5 N*m (76 kgf*cm, 66 in.*lbf)
- Connect the ignition coil connector.
- Connect the ignition coil to the spark plug, attach the ignition coil to the cylinder head cover, and install the bolt.
- INSTALL INTAKE AIR CONNECTOR PIPE (See INSTALLATION )
- INSTALL V-BANK COVER (See INSTALLATION )
- CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
- PERFORM INITIALIZATION
- Perform initialization (see
INITIALIZATION
).NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
- Perform initialization (see
INITIALIZATION
).