Section 16 (Air Conditioning): Condenser: Reassembly

WARNING: This page is about a different car, the 2007 Lexus SC 430. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL COOLER DRYER
1. Using needle nose pliers, install the cooler dryer.
2. Install 2 new O-rings to the cap.
3. Sufficiently apply compressor oil to the contact surfaces of the O-ring and the cap.
  Compressor oil: ND-OIL 8 or equivalent
4. Using a 10 mm hexagon wrench, install the cap to the condenser.
  Torque: 12.3 N*m (125 kgf*cm, 9 in.*lbf)
  
  Fig 1: Locating Contact Surfaces Of O-Ring And Cap
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002