Inspection Procedure

WARNING: This page is about a different car, the 2007 Lexus SC 430. However, it is still accessible from the selected car via links, so may be relevant.

REREGISTER KEY
1. Delete the DTC (see DTC CHECK / CLEAR ).
2. Reregister the key (which caused this DTC to be output) with the transponder key ECU (see REGISTRATION ).
3. Insert the same key into the ignition key cylinder.
4. Reregister the key and insert this key into the ignition key cylinder. Check that the engine starts with the key.
  OK:
  
  Engine starts.
NG: REPLACE KEY

OK: END