Installation

2UZ-FE ENGINE CONTROL SYSTEM: ECM: INSTALLATION

INSTALLATION

1. INSTALL ECM





(a) Install the ECM bracket No. 2 with the 2 screws to the ECM.
(b) Install the ECM bracket No. 1 with the 2 screws to ECM.
(c) Install the ECM with the 3 nuts.
Torque: 13 Nm (133 kgf-cm, 10 ft-lbf)
(d) Connect the 5 ECM connector.
2. INSTALL GLOVE COMPARTMENT DOOR SUB-ASSEMBLY
3. INSTALL INSTRUMENT PANEL ORNAMENT
4. INSTALL INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO. 2