Typical Enabling Conditions
| Monitor will run whenever these DTCs are not present | P0010, P0020 (VVT Oil Control Valve) P0011, P0021 (VVT System - Advance) P0012, P0022 (VVT System - Retard) P0016, P0018 (VVT System - Misalignment) P0031, P0032, P0051, P0052 (Air Fuel Ratio Sensor Heater) P0100, P0102, P0103 (Mass Air Flow Sensor) P0115, P0117, P0118 (Engine Coolant Temperature Sensor) P0125 (Insufficient Coolant Temperature for Closed Loop Fuel Control) P0120, P0121, P0122, P0123, P0220, P0222, P0223, P2135 (Throttle Position Sensor) P0335 (Crankshaft Position Sensor) P1340 (Camshaft Position Sensor) P0340, P0345 (VVT Sensor) P0351 - P0358 (Igniter) P0412, P0418, P1613 (Secondary Air Injection System Control) P1441, P1442, P1444, P1445, P2440, P2441, P2444, P2445 (Secondary Air Injection System) P0500 (Vehicle Speed Sensor) |
| Battery voltage | 11 V or more |
| Fuel system status | Closed loop |
| Either of following conditions is met | Condition (a) or (b) |
| (a) Engine RPM | Less than 1000 RPM |
| (b) Intake air amount per revolution | 0.26 g/rev. or more |
| Catalyst monitor | Not executed |