How To Proceed With Troubleshooting

HINT: 

*: Use the Techstream.

1. VEHICLE BROUGHT TO WORKSHOP 

   NEXT: Go to next step 

2. CUSTOMER PROBLEM ANALYSIS 
   1. Confirm problem symptoms. Refer to PROBLEM SYMPTOMS TABLE .

      NEXT: Go to next step 

3. PASSENGER AIRBAG ON/OFF INDICATOR CHECK 

   NEXT: Go to next step 

4. DTC FOR CHECK (Present and Past DTC)* 
   1. Check for DTCs. Refer to DTC CHECK / CLEAR .
      RESULT
      
      

      Result	Proceed to
      DTC output occurs	A
      DTC output does not occur	B

      B → Go to PROBLEM SYMPTOMS TABLE 

      A: Go to next step 

5. DTC CHART 

   NEXT: Go to next step 

6. CIRCUIT INSPECTION* 

   NEXT: Go to next step 

7. REPAIR 

   NEXT: Go to next step 

8. CLEAR DTC (Present and Past DTCs)* 
   1. Clear DTCs. Refer to DTC CHECK / CLEAR .

      NEXT: Go to next step 

9. DTC CHECK (Present and Past DTC)* 
   1. Check for DTCs.
      RESULT
      
      

      Result	Proceed to
      DTC output does not occur	A
      DTC output occurs	B

      B → Go to step 5 

      A: Go to next step 

10. SYMPTOM SIMULATION 
    1. Check the passenger airbag ON/OFF indicator condition. Refer to DIAGNOSIS SYSTEM .
       RESULT
       
       

       Result	Proceed to
       Passenger airbag ON/OFF indicator operates normally	A
       Passenger airbag ON/OFF indicator ("OFF") and SRS warning light come on	B

       B → Go to step 5 

       A: Go to next step 

11. CONFIRMATION TEST 

    NEXT → END