LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2009 >> IS F >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Power Window Control System (Diagnostics - Circuit Tests)) >> Power Window Control System >> Circuit Tests >> Front Passenger Side Power Window Switch Power Source Circuit >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Passenger Side Power Window Switch Power Source Circuit: Procedure

WARNING: This page is about a different car, the 2011 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK WIRE HARNESS (MULTIPLEX NETWORK SWITCH - BATTERY AND BODY GROUND) 
    1. Disconnect the G6 connector.
    2. Measure the resistance and voltage according to the value(s) in the table below.

      Standard resistance

      Tester Connection Condition Specified Condition
      G6-7 (E) - Body ground Always Below 1 Ω

      Standard voltage

      Tester Connection Condition Specified Condition
      G6-12 (BDRJ) - Body ground Always 11 to 14 V

    NG → REPAIR OR REPLACE HARNESS OR CONNECTOR 

    OK → PROCEED TO NEXT INSPECTION PROCEDURE SHOWN IN  PROBLEM SYMPTOMS TABLE  

scientia non olet · About LEMON Manuals