LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2009 >> LS 460 AWD >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control >> Dynamic Radar Cruise Control System >> Distance Control Switch Circuit >> Inspection Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection Procedure

  1. READ VALUE USING TECHSTREAM (DISTANCE CONTROL SWITCH) 
    1. Check the Data List for proper functioning of the distance control switch.

      Radar Cruise 

      RADAR CRUISE REFERENCE CHART

      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Distance Control Switch Distance control switch signal/ON or OFF ON: Distance control switch is ON
      OFF: Distance control switch is OFF
      -

      OK: 

      Display changes according to steering pad switch with modulator (distance control switch) operation described in above table. 

      NG: Go to step 2 

      OK: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE  (See PROBLEM SYMPTOMS TABLE )

  2. READ VALUE USING TECHSTREAM (STEERING PAD SWITCH WITH MODULATOR) 
    1. Check the Data List for proper functioning of the steering pad switch with modulator.

      Steering Pad Switch 

      STEERING PAD SWITCH REFERENCE CHART

      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      ACC SW Steering pad switch with modulator (distance control switch) signal/ON or OFF ON: Steering pad switch with modulator (distance control switch) is ON
      OFF: Steering pad switch with modulator (distance control switch) is OFF
      -

      OK: 

      Display changes according to steering pad switch with modulator (distance control switch) operation described in above table. 

      NG: REPLACE STEERING PAD SWITCH WITH MODULATOR  (See REMOVAL )

      OK: REPLACE DRIVING SUPPORT ECU  (See REMOVAL )