Data List / Active Test
WARNING: This page is about a different car, the 2011 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
- READ DATA LIST
HINT:
Using the Techstream DATA LIST allows switch, actuator and other item values to be read without removing any parts. Reading the DATA LIST early in troubleshooting is one way to save time.
- Connect the Techstream to the DLC3.
- Turn the ignition switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Body Electrical / (desired system) / Data List.
- Read the Data List according to the display on the Techstream.BODY (BODY ECU)
Tester Display Measurement Item/Range Normal Condition Diagnostic Note ACC SW Ignition switch or engine switch ACC signal / ON or OFF ON: Ignition switch on (ACC or IG)
OFF: Ignition switch off- IG SW Ignition switch or engine switch IG signal / ON or OFF ON: Ignition switch on (IG)
OFF: Ignition switch off- Parking Brake SW Parking brake switch signal / ON or OFF ON: Parking brake switch is ON
OFF: Parking brake switch is OFF- D Door Courtesy SW Driver side door courtesy switch signal / ON or OFF ON: Driver side door is open
OFF: Driver side door is closed- P Door Courtesy SW Passenger side door courtesy switch signal / ON or OFF ON: Front passenger side door is open
OFF: Front passenger side door is closed- Rear Door Courtesy SW Rear door courtesy switch signal / ON or OFF ON: Rear door (LH or RH) is open
OFF: Rear door (RH and LH) is closed- Passenger Lock Pos SW Passenger side door lock position switch signal / ON or OFF ON: Front passenger side door is unlocked
OFF: Front passenger side door is locked- Rear Lock Position SW Rear door lock position switch signal / ON or OFF ON: Rear door (RH or LH) unlocked
OFF: Rear door (RH and LH) locked- Illumination Rate Info Illumination rate information / 0 ms. to 99.99 ms. Condition value will be displayed - D-Door Lock Pos SW Driver side door lock position switch signal / ON or OFF ON: Driver side door is unlocked
OFF: Driver side door is locked- COMBINATION SWITCH (COMBINATION SWITCH ECU)Tester Display Measurement Item/Range Normal Condition Diagnostic Note Front Fog Light Switch Front fog light switch signal / ON or OFF ON: Front fog light switch is in ON position
OFF: Front fog light switch is not in ON position- Passing Light Switch Passing light switch signal / ON or OFF ON: Headlight dimmer switch is in FLASH position
OFF: Headlight dimmer switch is not in FLASH position- Dimmer Hi Switch High beam switch signal / ON or OFF ON: Headlight dimmer switch is in HI position
OFF: Headlight dimmer switch is not in HI position- Light Auto Switch Auto light switch signal / ON or OFF ON: Light control switch is in AUTO position
OFF: Light control switch is not in AUTO position- Head Light Switch Headlight control switch signal / ON or OFF ON: Light control switch is in HEAD position
OFF: Light control switch is not in HEAD position- Tail Light Switch Taillight switch signal / ON or OFF ON: Light control switch is in TAIL or HEAD position
OFF: Light control switch is off- Turn Left Switch Turn signal switch LH signal / ON or OFF ON: Turn signal switch is in LH position
OFF: Turn signal switch is not in LH position- Turn Right Switch Turn signal switch RH signal / ON or OFF ON: Turn signal switch is in RH position
OFF: Turn signal switch is not in RH position- Ignition Switch Signal Engine switch signal / ON or OFF ON: Engine switch on (IG)
OFF: Engine switch off- BODY NO. 5 (FRONT CONTROLLER)Tester Display Measurement Item/Range Normal Condition Diagnostic Note Alt L Signal Alternator L terminal signal / ON or OFF ON: Engine start
OFF: Except engine start-
- PERFORM ACTIVE TEST
HINT:
Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
- Connect the Techstream to the DLC3.
- Turn the ignition switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Body Electrical / (desired system) / Active Test.
- Perform the Active Test according to the display on Techstream.BODY (BODY ECU)
Tester Display Test Part Control Range Diagnostic Note Hazard Hazard light ON / OFF - Turn Light RH Relay Operation Turn signal light RH ON / OFF - Turn Light LH Relay Operation Turn signal light LH ON / OFF - Front Fog Light Relay Front fog light relay ON / OFF - Taillight Relay Tail light relay ON / OFF - Dimmer Signal Dimmer signal ON / OFF - Illuminated Entry System Interior light and ignition key cylinder light (Interior light switch in DOOR position and all doors are closed) ON/OFF - Center Console Light Operation Center console light ON / OFF - BODY NO. 5 (FRONT CONTROLLER)Tester Display Test Part Control Range Diagnostic Note Light Head (Low) Headlight (Low) ON / OFF - Light Head (High) Headlight (High) ON / OFF - Light Head HI DRL Operation Dimmed HI beams ON / OFF -