LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2009 >> LS 460 RWD >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Cellular Communication >> LEXUS Link System >> DTC 2-3 Digital Signal Processor Communication Error; DTC 2-4 GPS Communication Error >> Inspection Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection Procedure

  1. RESET MAYDAY ECU 
    1. Exit diagnosis mode and wait for 10 seconds.
      NOTE: After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.
    2. Disconnect the cable from the negative (-) battery terminal, and wait for 10 minutes.
    3. Reconnect the cable to the negative (-) battery terminal, and wait for 10 seconds.
    4. Turn the engine switch on (IG), and then check for the current DTC and historic DTC again (see DTC CHECK/CLEAR  ).

      Result 

      RESULT CHART

      Result Proceed to
      Current DTC 2-3 or 2-4 exists A
      Historic DTC 2-3 or 2-4 exists B

      B: CLEAR HISTORIC DTC (See  DTC CHECK/CLEAR   ) 

      A: REPLACE MAYDAY ECU TOGETHER WITH MAYDAY BATTERY AND THEN PERFORM REGISTRATION 

scientia non olet · About LEMON Manuals