Typical Malfunction Thresholds
WARNING: This page is about a different variant/trim than selected.
When either condition below is met: Condition (A) or (B)
Condition (A)
When 2 or more of the following signals are input at the same time:
TYPICAL MALFUNCTION THRESHOLDS CHART
| P position switch | ON |
| N position switch | ON |
| R position switch | ON |
| D position switch | ON |
Condition (B)
When all conditions below are met:
TYPICAL MALFUNCTION THRESHOLDS CHART
| P position switch | OFF |
| N position switch | OFF |
| R position switch | OFF |
| D position switch | OFF |