Typical Enabling Conditions
WARNING: This page is about a different variant/trim than selected.
P0712: Range check (low resistance)
TYPICAL ENABLING CONDITIONS CHART
| The monitor will run whenever this DTC is not stored | None |
| There are no typical enabling conditions | - |
P0713: Range check (high resistance)
One of the following conditions is met: Condition (A) or (B)
Condition (A)
TYPICAL ENABLING CONDITIONS CHART
| The monitor will run whenever this DTC is not stored | None |
| Time after engine start | 15 min. or more |
Condition (B)
The enabling conditions of the monitor for DTC P0711 are met